References

  1. BANKS, H. T., KUNISCH, K.: Estimation Techniques for Distributed Parameter Systems. Birkhäuser, Basel, 1995.
  2. BANKS, H. T., SMITH, R. C., BROWN, D. E., SILCOX, R. J., METCALF, V. L.: Experimental confirmation of a PDE – based approach to design of feedback controls. SIAM Journal on Control and Optimization, 35 (4), 1997.
  3. BELANSKÝ, J., KACHAŇÁK, A.: Zur Analyse des Verhaltens von Systemen mit Verteilten Parametern. Wissenschafliche Berichte der IHF Leipzig, 1975.
  4. BELANSKÝ, J., KACHAŇÁK, A.: Approximating Dynamic Models of Heat Exchangers as Distributed Parameter Systems. Proc. of INFORMATICA Conf., Bled, 1977.
  5. BELANSKÝ, J., KACHAŇÁK, A.: Rechnergestüzte Steuerung von Glasschmelzwannen. Proc. Int. Symp. IBAUSIL, Weimar, 1988.
  6. BELANSKÝ, J., KACHAŇÁK, A.: Rechnergestüzte Informationssysteme in der Glassindustrie. Proc. Int. Symp. Automatisierung und Messtechnik, Technische Univesität, Wien, 1990.
  7. BENSOUSSAN, A., DA PRATO, G., DELFOUR, M. C., MITTER, S. K.: Representation and Control of Infinite Dimensional Systems I., II. Birkhäuser, Basel, 1995.
  8. BUTKOVSKIJ, A.G.: Control Theory of Distributed Parameter Systems. Nauka, Moscow, 1965. (in Russian)
  9. BUTKOVSKIJ, A.G.: Characteristics of Distributed Parameter Systems. Nauka, Moscow, 1979. (in Russian)
  10. BUTKOVSKIJ, A. G.: Green’s Functions and Transfer Functions Handbook. Ellis Horwood Limited, Publishers Chichester, 1982.
  11. CAMACHO, E. F., BORDONS, C.: Model Predictive Control in the Process Industry. Springer-Verlag, 1995.
  12. CLARKE, D. W., MOHTADI, C., TUFFS, P. S.: Generalized Predictive Control – Part I. The Basic Algorithm. Part II. Extensions and Interpretations. Automatica, 23(2), 1987.
  13. CLARKE, D. W.: Application of Generalized Predictive Control to Idustrial Processes. IEEE Control Systems Magazine, 122, 1988.
  14. CURTAIN, R. F., PRITCHARD, A. J.: Infinite Dimensional Linear Systems Theory. Springer-Verlag, 1978.
  15. CURTAIN, R. F., ZWART, H., J.: An Introduction to Infinite Dimensional Linear Systems Theory. Springer-Verlag, 1995.
  16. DA PRATO, G., ZOLÉSIO, J-P.: Partial Differential Equation Methods in Control and Shape Analysis. Lecture Notes in Pure and Applied Mathematics Series, Marcel Dekker, 1997.
  17. DEDÍK, L., MIKULECKÝ, M., HULKÓ, G., ROHÁĽ, B., SAPÁK, Ľ., HŮLEK, P.: Identification and Modeling of Internal Organs Dynamics in Human Body. Research report. State programme of basic research, 1982-85, No. III-7-1/07. Slovak Academy of Sciences, Bratislava, 1985. (in Slovak)
  18. DEDÍK, L., MIKULECKÝ, M., HŮLEK, P., HULKÓ, G.: Modeling of Dynamic Systems and Prosesses in Human Body. Research report. State programme of basic research, 1985-87, No. III-9-4/01. Slovak Academy of Sciences, Bratislava, 1987. (in Slovak)
  19. FRANKOVIČ, B., et al.: Automation and Automatic Control. SNTL, Bratislava, 1966. (in Slovak)
  20. FRANKOVIČ, B., et al.: Automatisierung und Selbsttätige Steuerung. Verlag Technik, Berlin, 1970.
  21. FRANKOVIČ, B.: Adaptive and Learning Systems. VEDA, SAS, Bratislava, 1982. (in Slovak)
  22. HAGEN, H., editor. Curve and Surface Design. Geometric Design Series. SIAM, Philadelphia, 1992.
  23. HLAVÁČEK, I., BOCK, I., LOVÍŠEK, J.: Optimal Control of Variational Inequality with Applications to Structural Analysis. Applied Mathematics and Optimalisation 11, 1991.
  24. HLAVÁČEK, I., LOVÍŠEK, J.: Optimal Design of an Elastic or Elasto-Plastic Beam with Unilateral Elastic Foundation and Rigid Supports. Z. Angew. Math. Mech., 72 (1), Akademic Verlag, 1992.
  25. HROMEC, A., MIKULECKÝ, M., HULKÓ, G.: Clinical evaluation of a new model for erythoclastic function of the reticulo-histiocytar system. Preprints of XVI. World Congress of International Society of Internal Medicine, Praha, 1982.
  26. HULKÓ. G.: Contribution to Distributed Parameter Systems Theory (Generalized Models, Adaptive Control). Ph.D. thesis, Bratislava, 1977. (in Slovak)
  27. HULKÓ. G.: On Nonparametric Representation of Distributed Parameter Systems. Proceedings of the 5-th Symposium of the IFAC on Identification and Systems Parameter Estimation, Darmstadt, 1979.
  28. HULKÓ, G., SAPÁK, Ľ.: On Multilevel Decomposition of Distributed Parameter Systems. Proceedings of 2-nd Symposium of IFAC on Large Scale Systems: Theory and Applications, Toulouse, 1980.
  29. HULKÓ, G., ROHÁĽ, B., SAPÁK, Ľ.: On Adaptive Control of Distirbuted Parameter Systems. Preprints of 8-th World Congress of IFAC, Kyoto, 1981.
  30. HULKÓ, G., MIKULECKÝ, M.: Distrtibuted parameter model of liver dye excretion. Preprints of the 1-st International Symposium on Mathematical Modelling of Liver Dye Excretion, Bratislava-Smolenice, 1984.
  31. HULKÓ, G.: Distributed Parameter Systems Control by means of Multi-Input and Multi-Distributed-Output Systems I., II. Preprints of IMACS / IFAC Symposium “Distributed Parameter Systems ’87”, Hiroshima, 1987.
  32. HULKÓ, G.: Control of Distributed Parameter Systems by means of Multi-Input and Multi-Distributed-Output Systems. Preprints of 10-th World Congress of IFAC, Munich, 1987.
  33. HULKÓ, G.: Control of Lumped Input and Distributed Output Systems. Preprints of 5-th IFAC / IMACS / IFIP Symposium on Control of Distributed Parameter Systems, Perpignan, 1989.
  34. HULKÓ, G. a kol.: Identification of Lumped Input and Distributed Output Systems. Preprints of 5-th IFAC / IMACS / IFIP Symposium on Control of Distributed Parameter Systems, Perpignan, 1989.
  35. HULKÓ, G. a kol.: New Engineering Methods for Quantities Fields-Distributed Parameter Systems Control. Preprints of IFAC Symposium on LOW COST AUTOMATION, Milano, 1989.
  36. HULKÓ, G. a kol.: Computer Aided Design of Distributed Parameter Systems of Control. Preprints of 11-th World Congress of IFAC, Tallinn, 1990.
  37. HULKÓ, G. a kol.: Methods of Identification of Lumped Input and Distributed Output Systems. Preprints of 9-th IFAC/IFORS Symposium on Identification and Systems Parameter Estimation, Budapest, 1991.
  38. HULKÓ, G.: Lumped Input and Distributed Output Systems at the Control of Distributed Parameter Systems. Problems of Control and Information Theory, 20 (2), 1991.
  39. HULKÓ, G.: Control and Design of Lumped Input and distributed Output Systems. DSc.thesis, Bratislava, 1991. (in Slovak)
  40. HULKÓ, G., BELANSKÝ, J., BELAVÝ, C., KOVALČÍK, J., ANTONIOVÁ, M., SZUDA, J., VÉGH, P.: Self-Tuning Control of Lumped Input and Distributed Output Systems. Preprints of 5-th IFAC Symposium on Adaptive Systems in Control and Signal Processing, Budapest, 1995.
  41. HULKÓ, G., BELANSKÝ, J., BELAVÝ, C., KOVALČÍK, J., ANTONIOVÁ, M., SZUDA, J., VÉGH, P.: Identification and Modelling of Lumped Input and Distributed Output Systems of Accuracy Requested. Preprints of European Control Conference ECC 95, Roma, 1995.
  42. HULKÓ, G.: Adaptive and Predictive Control of Distributed Parameter Systems with Physical Constraints. Preprints of the Summer School Course on Identification and Optimization, COPERNICUS Project „Adaptive and Predictive Control with Physical Constraints“, Prague, 1995.
  43. KACHAŇÁK, A., BELANSKÝ, J.: Analyzing the Dynamics of Distributed Parameter Systems. Proc. of INFORMATICA Conf., Bled, 1976.
  44. KACHAŇÁK, A., BELANSKÝ, J.: The Dynamic Model of Glass Melting Furnace for Control. Proc., of INFORMATICA Conf., Bled, 1978.
  45. KACHAŇÁK, A., BELANSKÝ, J., PAULUS, J.: Microcomputer Control of the Glass Melting Furnace. Proc., of INFORMATICA Conf., Jahorina, 1985.
  46. KACHAŇÁK, A., BELANSKÝ, J.: Decentrale Steurung der Glasschmelz und Verarbeitungsprozesse. Proc. Int. Symp. IBAUSIL, Weimar, 1991.
  47. KACHAŇÁK, A., BELANSKÝ, J., BELAVÝ, C.: Application of Control Theory in Class of Distributed Parameter Models. Proc. IFAC Symp. Advanced Control of Chemical Processes, Toulouse, 1991.
  48. KACHAŇÁK, A., BELANSKÝ, J., PETRÁŠOVÁ, A.: Application of Expert Systems in the Domain of Glass Melting and Forming Lines. Proc. Conf. Systems Control and Artificial Intelligence, Smolenice, 1992.
  49. KACHAŇÁK, A., BELANSKÝ, J., HULKÓ, G., ROHÁĽ, B.: Identification Problems at Adaptive Control of distributed Parameter Systems. Research report. State programme of basic research, 1975-1980, No. III-1-1/5, Czechoslovak Academy of Sciences, Prague, 1980. (in Slovak)
  50. KACHAŇÁK, A., BELANSKÝ, J., HULKÓ, G., ROHÁĽ, B., SAPÁK, Ľ. et al.: Adaptive Contol of Distributed Parameter Systems. Research report. State programme of basic research, 1980-1985, No. III-8-15/5, Czechoslovak Academy of Sciences, Prague, 1985. (in Slovak)
  51. KACHAŇÁK, A., BELANSKÝ, J., HULKÓ, G., ROHÁĽ, B., SAPÁK, Ľ. et al.: Adaptive Contol of Thermal and Manufacturing Systems. Research report. State programme of basic research, 1985-1990, No. III-8-6/5, Czechoslovak Academy of Sciences, Prague, 1990. (in Slovak)
  52. KÁRNÝ, M., HALOUSKOVÁ, A., BÖHM, J., KULHAVÝ, R., NEDOMA, P.: Design of Linear Quadratic Adaptive Control: Theory and Algorithms for Practice. Kybernetika, 21, 1985.
  53. KORNEJČUK, N. P.: Extremal Problems of the Approximation Theory. Nauka, Moscow, 1976. (in Russian)
  54. KORNEJČUK, N. P.: Accurate Constans in the Approximation Theory. Nauka, Moskva, 1987. (in Russian)
  55. KUČERA, V.: Analysis and Design of Discrete Linear Control Systems. Prentice Hall, 1993.
  56. KUNEŠ, J.: Modeling of the thermal processes. SNTL, Prague, 1989. (in Czech)
  57. LIONS, J. L.: Optimal Control of Systems Governed by Partial Differential Equations. Springer-Verlag, 1971.
  58. LOVÍŠEK, J.: Optimal Control of Variational Inequality with Applications to Axisymmetric Shells. Aplikace Matematiky, 32 (6), 1987.
  59. LOVÍŠEK, J.: Optimalization of the Thickness of Layers of Sandwich Conical Shells. Applied Mathematics and Optimalisation, 29, 1991.
  60. LOVÍŠEK, J.: Optimal Design of Laminated Plat with Obstacle. Applications of Mathematics, 37 (5), 1992.
  61. MÉSZÁROS, A., DOSTÁL, P., MIKLEŠ, J., REVUS, M.: Dynamic Behavior and Observability Analysis of a Tubular Chemical Reactor. Preprints of 18-th European Congress, CEF’87, Taormina, 1987.
  62. MÉSZÁROS, A.: Optimal Feedback for a Group of Distributed Parameter Chemical Technologies. Automatizace, 32, 1989. (in Slovak)
  63. MIKLEŠ, J., MÉSZÁROS, A., CAUDT, Ľ., DOSTÁL, P.: Adaptive Model Analysis for a Class of Distributed Parameter Systems. Preprints of 13-th European Symposium CHEMPLANT’80, Hévíz, Hungary, 1980.
  64. MIKLEŠ, J., PECHA, F., MÉSZÁROS, A., DOSTÁL, P.: Optimal Feedback Control of a Class of Distributed Parameter Systems with Incomplete Measurement. Preprints of 12-th International Symposium. CHEMCONTROL’81, Vienna, 1981.
  65. MIKLEŠ, J., TAKÁCS, A., MÉSZÁROS, A., PROKOP, R.: Adaptive Control of Tubular Chemical Reactors. Preprints of 9-th World Congress of IFAC, Budapest, 1984.
  66. MIKULECKÝ, M., DEDÍK, L., HULKÓ, G.: The Identification of the Process of Indocyanine Green Plasma Clearance in Man by an Adaptive Model. Preprints of the Yugoslav International Symposium INFORMATIACA, Bled, 1975.
  67. MORARI, M., ZAFIROU, E.: Robust Process Control. Prentice Hall, 1989.
  68. PETERKA, V.: Predictor-based Self-tunning Control. Automatica, 20 (1), 1984.
  69. RICHALET, J.: Industrial Applications of Model Based Predictive Control, Automatica, 23 (5), 1993.
  70. ROHÁĽ-IĽKIV, B.: Identification of Systems. ES-STU, Bratislava, 1987. (in Slovak)
  71. ROHÁĽ-IĽKIV, B,. ZELINKA, P., RICHTER, R.: Experimental Systems for Distributed Process Control Education, Preprints of 3-rd International Symposium on Advances in Education of Automatic Control, Tokyo, 1994.
  72. ROHÁĽ-IĽKIV, B.: Identification of Distributed Parameter Systems. Preprints of the Summer School Course on Identification and Optimization, Prague, 1995.
  73. SÖETERBOERK, R.: Predictive Control. A Unified Approach. Prentice Hall, 1992.
  74. SAPÁK, Ľ., HULKÓ, G.: Identification of Distributed and Nonparametric Models. Preprints of the 1-st International Symposium on Mathematical Modelling of Liver Dye Excretion, Bratislava-Smolenice, 1984.
  75. SINGER, I.: The Theory of Best Approximation and Functional Analysis. SIAM, Philadelphia, 1974.
  76. SKÁKALA, J., ŠUTEK, Ľ.: Adaptive Model for Solving Identification Problems. Preprints of the 2-nd IFAC World Congress, London, 1963.
  77. SKÁKALA, J. et al.: Mathematical Description of Gasoline Reforming Process for Optimal Control. Research report. In research programme of Csechoslovak Academy of Sciences, Institute of Technical Cybernetics, Slovak academy of Sciences, Bratislava, 1966. (in Slovak)
  78. SKÁKALA, J., KACHAŇÁK, A., BELANSKÝ, J.: Modeling and Identification of Distributed Parameter Systems. Research report. State programme of basic research, 1967-1972, No. III-1-1/6 Czechoslovak Academy of Sciences, Prague, 1972. (in slovak)
  79. SKOKAN, L., MIKULECKÝ, M., KUBÁČEK, Ľ., DEDÍK. L., HULKÓ, G:, ROHÁĽ, B., SAPÁK, Ľ.: Identification and Modeling of Contrast Compaunds Kinetics in Human body. Research report. State programme of basic research, 1975-1982, No. III.-7-1/8, Slovak Academy of Sciences, Bratislava, 1982. (in Slovak)
  80. SYSTEMS AND CONTROL ENCYCLOPEDIA IFAC. Ed. M. G. Singh, Pergamon Press, 1987.
  81. VAJTA, M.: New Model Reduction Technique for a Class of Parabolic Partial Differential Equation. Preprints of IEEE International Conference on Systems Engineering, Dayton, Ohio, USA, 1991.
  82. VESELÝ, V., MURGAŠ, J.: Control of Technological Processes. ES-STU, Bratislava, 1985. (in Slovak)
  83. VESELÝ, V.: Large Scale Dynamic System Stabilization Using the Principle of Dominant Subsystems Approach . Kybernetika, 29, 1993.
  84. VESELÝ, V., MURGAŠ, J.: Decentralized Adaptive Stabilization of Nonlinear Systems. Int. J. Control, 58, 1993.
  85. ZAVJALOV, JU. S., KVASOV, P. I., MIROŠPIČENKO, V. L.: Spline Functions Approximations. Nauka, Moscow, 1980. (in Russian)
  86. ZÍTEK. P.: Simulation of Dynamic Systems. SNTL, Prague, 1990. (in Czech)
  87. ZOLÉSIO, J-P.: Boundary Control and Variation. Lecture Notes in Pure and Applied Mathematics Series, Marcel Dekker, 1997.
  88. WANG, P. K. C.: Control of distributed parameter systems. In: Advances in Control Systems: Theory and Applications, 1, Academic Press, 1964.
  89. Toolboxes MATLAB. The MathWorks, Inc., Natick, Mass. 017 60, USA.